Degunorm is the most prescribed precious dental alloy in the world. It is suitable for use with inlays to partials and is also the material
used for the multi-CON series of attachments. This range of indications provides you a lifelong companion for all ranges of dental
care and reduces the materials used to a minimum.

• high gold content precious dental alloy
• rich yellow color
• can be veneered using the low fusing, hydro-
  thermal porcelain Duceragold
• extremely hard
• can be applied universally in all indications
• very high corrosion resistance
• contains no palladium
• bio-compatibility tested and certified
• well coordinated solders and laser welding wire
  available
• can be pickled using Neacid®

Degunorm pur combines the advantages of this system with all the possibilities opened by a palladium and copper free restoration.
This type of alloy is designed for bridge spans of up to a maximum of 8 units. Degunorm pur stands for clinically tried and tested compatibility, corrosion resistance and long-term stability, like all other components of the GoldenGate System. Shorter firing times are possible due to the increased heat rate of 80 °C per minute.

• high gold content precious dental alloy
• palladium and copper fee
• shorter firing times with increased heat rate
  of 80 °C per minute
• can be veneered using the low fusing, hydro-
  thermal porcelain Duceragold
• high thermal resistance
• high corrosion resistance
• light oxidation coloring
• rich yellow color
• very good polishing properties
• no need for the use of Degunorm classic base
  paste
• can be pickled with Neacid®
• long term availability promise

Degunorm supra allows the construction of highly aesthetic and safe dental care even for very wide span bridges or implant borne
super-structures. With its low palladium content, this alloy reaches very high hardness levels. A shorter firing time is also possible due
to an increased heat rate of 80 °C per minute.

• high gold content precious dental alloy
• copper free
• shorter firing times and increased heat rate
  of 80 °C per minute
• can be veneered using the low fusing, hydro-
  thermal porcelain Duceragold
• high thermal resistance
• high corrosion resistance
• light oxidation coloring
• rich yellow colour
• very good polishing properties
• no need for the use of Degunorm classic base
  paste
• can be pickled with Neacid®
• long term availability promise